MHG58462 - Building, Croulin (east)

Summary

Building, Croulin (east)

Type and Period (1)

  • BUILDING (Post Medieval - 1560 AD? to 1900 AD?)

Protected Status

  • None recorded

Full Description

Croulin (east)
These sites were recorded by NOSAS in 2008/9 as part of an archaeological survey of outer Loch Hourn.

There are small townships on both sides of the burn some 500m inland, whilst lower down, closer to the shore, there are numerous scattered ruins within the now enclosed fields (figs. 13 and 14). The homes of the 2 current occupants, along with their various outbuildings, sit to either side of the enclosed ground. We estimate that as much as 10 hectares of land was in cultivation at one time. The cultivation remains are still very visible, both on the ground and in aerial photographs. Later the best of the ground was enclosed by a substantial stone wall and shows evidence of having been ploughed by tractor. A sheep fank was constructed on the top side of the enclosed ground (Site 1136; fig. 14; plate 27). It is also possible that - after the lower ground was first enclosed - the poorer ground above the head dyke was cultivated in lazy beds for potatoes, at the time when the population was at his peak.

Site 1168. A building forming part of a bracken covered township on the E side of the burn. It is aligned N-S, measures 4m x 2m internally and has round corners externally. The turf covered footings are 0.2m high, though the NW corner stands to 0.5m, where it is also underbuilt to 0.6m high. The W wall is spread to 1.2m in width. <1>

Note; Site not visible on AP’s so location approximate. (T Blackie 13/8/18)

Sources/Archives (1)

Map

Location

Grid reference Centred NG 7817 0902 (5m by 5m) (2 map features)
Map sheet NG70NE
Civil Parish GLENELG
Geographical Area LOCHABER

Finds (0)

Related Monuments/Buildings (1)

Related Investigations/Events (1)

External Links (0)

Comments and Feedback

Do you have any more information about this record? Please feel free to comment with information and photographs, or ask any questions, using the "Disqus" tool below. Comments are moderated, and we aim to respond/publish as soon as possible.